175 Brake Service
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175202
Printed Date: 09 Jan 2025 at 9:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 175 Brake Service
Posted By: TomYaz
Subject: 175 Brake Service
Date Posted: 16 Oct 2020 at 6:53am
|
So I got the service manual....doesnt say much. How does one remove the circled parts?  ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: MACK
Date Posted: 16 Oct 2020 at 7:00am
| After removing final drive, it slides off shaft. MACK |
Posted By: TomYaz
Date Posted: 16 Oct 2020 at 7:13am
Will try. ------------- If its not an All-Crop, it all crap! |
MACK wrote:Posted By: Rick
Date Posted: 16 Oct 2020 at 7:22am
| Tom...Sent you a PM on the brakes... |
Posted By: Alex09(WI)
Date Posted: 16 Oct 2020 at 2:43pm
|
Tom, if you can get the following link to work, this is exactly what you need. https://www.facebook.com/awtractorrepair/posts/d17-brake-job-step-by-step-part-2-after-removing-retaining-harpin-you-must-slide/1165362463859271/" rel="nofollow - https://www.facebook.com/awtractorrepair/posts/d17-brake-job-step-by-step-part-2-after-removing-retaining-harpin-you-must-slide/1165362463859271/ ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: TomYaz
Date Posted: 18 Oct 2020 at 7:06pm
God stuff Alex, thanks! ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 18 Oct 2020 at 7:17pm
Well here is todays fresh hell: Yes the pin used to hold the lower brake pan has sheard off inside.... Here is the inside part...notice there is a collar of sorts that my wrench is around (almost), also note the washers....neither are in the parts illustration I show. Thanks Allis!....also wonder why the other brake surface shown here: https://www.facebook.com/awtractorrepair/photos/pcb.1165431930518991/1165426223852895/ Is not on this illustration?....Oh, well my inner OCD computer programmer coming out... Looks like this will be it for a while on this project as I am going in for rotator cuff surgury Thursay and will be out of commission for a while... Thanks for all the help! ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 18 Oct 2020 at 7:18pm
oops forgot to add the econd pic:  ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 18 Oct 2020 at 7:19pm
|
BTW wasnt me who sheared that off...thats how I found it. ------------- If its not an All-Crop, it all crap! |
Posted By: DSeries4
Date Posted: 18 Oct 2020 at 7:34pm
|
That pin does not have to come out. Take the small pin out that is below the wrench instead. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: TomYaz
Date Posted: 18 Oct 2020 at 7:36pm
Its gotta come out. brake rod is sheared off underneath all that too....besides, I could not live with myself leaving rusted frozen sheared parts in place.... ------------- If its not an All-Crop, it all crap! |
Posted By: Fred in Pa
Date Posted: 19 Oct 2020 at 10:19am
|
I have been doing these for 35 years , this is not the worst I have ever seen . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: TomYaz
Date Posted: 19 Oct 2020 at 11:59am
My sympathies ------------- If its not an All-Crop, it all crap! |
Posted By: Fred in Pa
Date Posted: 19 Oct 2020 at 12:46pm
|
U WILL GET GOOD AT THEM SOMEDAY TOO. GOOD LUCK ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |