Light Bracket for D12-III
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17518
Printed Date: 24 Feb 2025 at 12:26am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Light Bracket for D12-III
Posted By: Terry/EasternIa
Subject: Light Bracket for D12-III
Date Posted: 31 Aug 2010 at 8:19pm
My brother is looking for light brackets for his D12-III. The ones that go on the fenders. And rear light bracket also.The left bracket is a grab handle also. D10, 15 &17 seriesIII are the same also. Terry.
|
Replies:
Posted By: DSeries4
Date Posted: 31 Aug 2010 at 9:55pm
Good luck, they are very hard to find. Try searching through tractor wrecking yards and you may get lucky.
|
Posted By: JoeO(CMO)
Date Posted: 02 Sep 2010 at 6:06am
I have a D10 III which was missing the rear work light. I found one after 20 years of looking,,,,walked by this hardly recognizable partial skeleton of a tractor(a I400) and there it was-a light complete with fender bracket and original hardware, no dents, but wiring had been repaired and length was ok. It was as if someone put that light right where I could see it! I had been through this salvage a few times looking for other items and hadn't seen it before. I had a D15 fender bracket that I ground the bottom so it would set on the D10 III fender, used it until I found the correct one.
-------------
|
Posted By: armandjones82
Date Posted: 21 Jan 2011 at 8:35pm
If there are any other way that brands like http://www.stylintrucks.com/sn.aspx?attribute_value_string%7CBrand=KC+HiLites - kc hilites and other brands can fit to that, then it would be much better to really have that one in order to make things well on your light bracket needs. If not, then try to resort it to other options in order to make things work out.
|
Posted By: Ray
Date Posted: 22 Jan 2011 at 12:41pm
i WOULD HAVE LIGHTS AND BRACKETS BOTH FOR THAT TRACTOR. 785-353-2392
|
Posted By: acdeerboy123
Date Posted: 22 Jan 2011 at 8:08pm
need fenders for a d-12 series III
|
|