Farm Equipment - WD45 Delco starter switch screws

Print Page | Close Window

WD45 Delco starter switch screws

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174955
Printed Date: 22 Aug 2025 at 1:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 Delco starter switch screws

Posted By: twinsonfarm
Subject: WD45 Delco starter switch screws
Date Posted: 05 Oct 2020 at 1:50pm

Does anyone happen to know the screw thread size for a delco starter (starter switch) on a WD45. I removed my starter switch and the two mounting screws for the switch went awol. Thank you.

Replies:

Posted By: PaulB
Date Posted: 05 Oct 2020 at 2:44pm

If I remember they are 10-32. Just be sure that they are not too long and go in too far to short into the field coils.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: twinsonfarm
Date Posted: 05 Oct 2020 at 2:48pm

Thank you, Jim