HD5G brake rod pins
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174701
Printed Date: 04 Dec 2024 at 5:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD5G brake rod pins
Posted By: LouSWPA
Subject: HD5G brake rod pins
Date Posted: 25 Sep 2020 at 8:37pm
|
anyone have a source for the pins that connects the brake band to the foot peddle rod? ------------- I am still confident of this; I will see the goodness of the Lord in the land of the living. Wait for the Lord; be strong and take heart and wait for the Lord. Ps 27 |
Replies:
Posted By: gemdozer
Date Posted: 26 Sep 2020 at 4:20am
| This rod have 2 cutter pines and parts number 088389 and should have some |
Posted By: dadsdozerhd5b
Date Posted: 26 Sep 2020 at 8:08am
|
Lou, do you mean the pins about 3" long, about 5/8" diameter that you pull from the holes in the side of the housing? I made my own from stainless steel rod, I got it from Mcmaster Carr, cut to length and drilled and tapped a 5/16" hole in one end to be able to pull it out, very important to do as I just had to pull mine to repair the clutch in my loader.. I do have a few old ones in steel, slightly worn. I can look for you if you want the used ones. i made them out of Stainless as steel ones can get frozen in the Z arm. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Posted By: LouSWPA
Date Posted: 26 Sep 2020 at 8:21am
|
Thanks. actually I wasn't real clear on my description. I'm looking for the 049993. and also for 050326 brake band pins. Thanks ------------- I am still confident of this; I will see the goodness of the Lord in the land of the living. Wait for the Lord; be strong and take heart and wait for the Lord. Ps 27 |
Posted By: LouSWPA
Date Posted: 26 Sep 2020 at 8:29am
Ya, that's the ones. The one that connects the actuating rod to the bell crank is also MIA, but it was those two I was referring to. But you have a good idea, I think I will just get SS and make my own. McMasterCarr is a good friend of mine! LOL As you can see in the pics, 'some assembly required', and a few pieces are missing thanks ------------- I am still confident of this; I will see the goodness of the Lord in the land of the living. Wait for the Lord; be strong and take heart and wait for the Lord. Ps 27 |
dadsdozerhd5b wrote:Posted By: gemdozer
Date Posted: 26 Sep 2020 at 8:47am
| If you can have these pines from Dadsdozerhd5b I let him go am from CANADA but if I can help some time am still have some ALLIS CHALMERS small parts. |
Posted By: Coke-in-MN
Date Posted: 26 Sep 2020 at 10:34am
|
remember those pins have a relief area machined into them so they won't slide out , some lathe work required as well as drilling and tapping end . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: dadsdozerhd5b
Date Posted: 27 Sep 2020 at 11:59am
|
I did not put any relief areas on mine. once they are down where they belong I think they can"t come out. the one is trapped by the bracket mounted to the rear housing. the one that goes through the adjuster now that you say that might be able to come out. i always thought that the relief was wear on the pin. I have 2 HD5s running with straight pins and none have come out. maybe i am lucky. now that I say that, here comes trouble! I just had my loader apart 2 weeks ago as the center bolt came out of the throw out bearing hub and they were where I put them. now I am wondering. hmmmm. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Posted By: Coke-in-MN
Date Posted: 27 Sep 2020 at 3:49pm
|
Yep a reason for everything - and to have a pin slide out of the brake band or move to one side and hang up internally - one of the little things of why duplicating parts to same look of old ones (without the wear) is recommended. I made up the blocks that go in the master clutch throw out bearing forks on mill and made external dimension slightly larger to make up for the wear on forks . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: LouSWPA
Date Posted: 28 Sep 2020 at 3:57pm
|
BTW Coke, SN was right where you said it would be, under about four thick coats of Persian Orange! 11,2XX ------------- I am still confident of this; I will see the goodness of the Lord in the land of the living. Wait for the Lord; be strong and take heart and wait for the Lord. Ps 27 |
Posted By: Coke-in-MN
Date Posted: 28 Sep 2020 at 8:42pm
|
srl # says a 1951 for build 11071 to 14289 ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |