tachometer
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174550
Printed Date: 27 Apr 2024 at 2:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: tachometer
Posted By: bigfish_Oh
Subject: tachometer
Date Posted: 20 Sep 2020 at 1:09pm
I have a tachometer wondering if it 4 or 6 cylinder. i am assuming it is a combine, hoping I can use it on my WC . I don't know if it 4 or 6 cylinder. The person did not scrap many sixes or big tractors.  ------------- 1941 WC sat for 29 years,started & dynoed 27 h.p. 1957 WD45 Grandpa bought new,factory p.s.,added wfe 1951 WD, factory p.s. 1960 D14 HnMk IV BkHoe 4 sale 2014 HD Tri Glide 2009 GMC CC SLT Dually |
Replies:
Posted By: bigfish_Oh
Date Posted: 20 Sep 2020 at 1:15pm
------------- 1941 WC sat for 29 years,started & dynoed 27 h.p. 1957 WD45 Grandpa bought new,factory p.s.,added wfe 1951 WD, factory p.s. 1960 D14 HnMk IV BkHoe 4 sale 2014 HD Tri Glide 2009 GMC CC SLT Dually |
Posted By: chaskaduo
Date Posted: 20 Sep 2020 at 2:19pm
  ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: DrAllis
Date Posted: 20 Sep 2020 at 4:37pm
| Doesn't make any difference. It got its signal from a speed sensor on the flywheel I think. |
Posted By: bigfish_Oh
Date Posted: 20 Sep 2020 at 5:28pm
|
ok, thanks ------------- 1941 WC sat for 29 years,started & dynoed 27 h.p. 1957 WD45 Grandpa bought new,factory p.s.,added wfe 1951 WD, factory p.s. 1960 D14 HnMk IV BkHoe 4 sale 2014 HD Tri Glide 2009 GMC CC SLT Dually |
Posted By: MACK
Date Posted: 20 Sep 2020 at 8:22pm
| I had one hooked up a 3208 cat, but #of notches on flywheel wasn't right so didn't register quite right. Don't remember how many notches it takes. Thought I had 12 and it 13 ? MACK |
Posted By: DSeries4
Date Posted: 21 Sep 2020 at 8:48pm
|
That is a Gleaner combine TACH from a K or F. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Ray54
Date Posted: 22 Sep 2020 at 12:43pm
|
Looks like the MH's as well. But you have switch so you could read ground speed or cylinder rpm as well as engine rpm. The 79 and latter a electronic read out rather than dial. Would assume this could read multiply functions if you had a switch and the disc with notches and the reader.
|