Farm Equipment - Needles needed for 443

Print Page | Close Window

Needles needed for 443

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174537
Printed Date: 28 Apr 2024 at 2:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Needles needed for 443

Posted By: WLHD21
Subject: Needles needed for 443
Date Posted: 19 Sep 2020 at 8:22pm

Baling 3rd crop today and pin fell out of needle bail, thus allowed the needles to fall forward. The safety stop should have stopped the carnage that followed but the cotter pin that connects to the spring broke also. So long story short I need two needles and bail. Thanks

Replies:

Posted By: wekracer
Date Posted: 19 Sep 2020 at 9:41pm

I’m so sorry to hear that. I can’t help. But I know how you feel

Posted By: Mikez
Date Posted: 19 Sep 2020 at 9:47pm

What is the part numbers

Posted By: Blackthorn34
Date Posted: 19 Sep 2020 at 10:15pm

You can weld them easily. Welded the needles on my Massey #12 with a $90 harbor freight flux core welder. Bevel, preheat, weld, slow cool in sand. Broke my needles last year- put over 600 bales through it after fixing them without a single miss tie. Saved me a ton of money.

Posted By: Jsmittyd10
Date Posted: 23 Sep 2020 at 4:48pm

Twine or wire? I believe the set on a 303 is the same and I have a set In Oklahoma that are twine needles

-------------
Absolutely love Allis Chalmers tractors
D17 s4, D10 s3, D15 s2, 720, D17 forklift, 6080 2wd with cab, I40 backhoe, d12 industrial with backhoe and loader

Posted By: WLHD21
Date Posted: 25 Sep 2020 at 9:40am

Twine, also need the yoke . Please call 563-380-4509

Posted By: Eldon (WA)
Date Posted: 27 Sep 2020 at 1:03pm

303 are 2 bolt mount, 444 is a 3 bolt mount, at least mine are.

-------------
ALLIS EXPRESS!
This year:

Posted By: Tracy Martin TN
Date Posted: 27 Sep 2020 at 8:31pm

IIRR there was a serial number break on the two bolt to three bolt needles. I think 1 baler I have has two bolt the other has three. HTH Tracy

-------------
No greater gift than healthy grandkids!