38 allis chalmers b front rims
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174509
Printed Date: 10 Feb 2025 at 8:53am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 38 allis chalmers b front rims
Posted By: ac89
Subject: 38 allis chalmers b front rims
Date Posted: 18 Sep 2020 at 7:19pm
| I'm looking for information on the cast b front wheel centers. I'm missing the clamps and the rims aren't the greatest. Does the allis g use the same wheel clamps on the front? |
Replies:
Posted By: fleeter allis fan
Date Posted: 25 Sep 2020 at 10:49am
|
Hi. What is the serial # of your B? Is it one of the early Waukesha units? I think the original wheels on those units were one piece steel rims with 6 bolt hubs. I have never seen one with weighted cast wheels, but in the parts book that I have, it looks like from S# 101 through 9018 (Which would make it a 1939) the wheels bolt to the rims with eight bolts. At any rate, I am pretty sure they were all 15 inch rims. My G has 12 inch rims with three clamps bolted to the cast centers, so it doesn't look to me that any of the parts are interchangable. ------------- I'm a man...and I can change...if I have to... I guess. '44 B, '46 WF, '49 G, 810GT, 916H, 620 |
Posted By: chaskaduo
Date Posted: 25 Sep 2020 at 11:54am
|
Tractor Data says 1938 begins at 97 1939 begins at 11800 http://www.tractordata.com/farm-tractors/000/0/0/3-allis-chalmers-b.html" rel="nofollow - http://www.tractordata.com/farm-tractors/000/0/0/3-allis-chalmers-b.html ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: fleeter allis fan
Date Posted: 25 Sep 2020 at 8:48pm
Yes, my mistake. The serial # 101 through 9018 that I mentioned earlier would be from 1938, not 1939 as I indicated.  As I said earlier, the parts book that I have shows those tractors with a center hub bolted to the rim. I didn't notice earlier that a note at the bottom of the page has a list of exceptions. It looks like about 185 units in that range had different front wheels, but the book does not specify what they did have. ------------- I'm a man...and I can change...if I have to... I guess. '44 B, '46 WF, '49 G, 810GT, 916H, 620 |
Posted By: ac89
Date Posted: 26 Sep 2020 at 4:45pm
| My serial number is 2689 |
Posted By: fleeter allis fan
Date Posted: 26 Sep 2020 at 8:38pm
|
So not a Waukesha B but a very eary one. How are the center hubs connected to the rims? The book shows four bolts from the rim to the wheel. It also looks like the wheel is fixed to the spindle with one center nut as part of the bearing train. No hub or wheel nuts? ------------- I'm a man...and I can change...if I have to... I guess. '44 B, '46 WF, '49 G, 810GT, 916H, 620 |
Posted By: ac89
Date Posted: 27 Sep 2020 at 8:59am
| The cast hubs are connected to the spindle like the regular later hubs are with 1 nut. Then the rims bolt on with 4 bolts and clamps I have just tracked down a good front with most of the hardware I need with good rims. I'm still looking for a good seat assembly someone has put a pan seat on it I want to put the correct bench seat back on it. Thanks everyone for the information I'll post a picture sometime soon. |
Posted By: Orange Day Farm
Date Posted: 08 Feb 2021 at 10:02am
|
If you are needing the front rim locks for the cast hubs on a 38' B I have spares. I have three 1938 B's, and parted out two already as well. The 38' cast hub B is a 1 year only design and I have not found any other model with the same parts. ------------- Orange Day Farm Clint Worron 30' United, 37' WC, 38' B, 41' C&80 Series cultivators, IB, 51' CA, 42' WF, 49' WD,53' WD&cultivators, 57' WD45&33 Picker, D12, D15HC, 180, All Crop 60, 444 baler, etc... |
Posted By: steve(ill)
Date Posted: 08 Feb 2021 at 11:15am
above is the 1938 wedge rim... below is the 6 bolt 1937 Wauk rim  ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 08 Feb 2021 at 11:17am
Standard rim used on later B and all C tractors ------------- Like them all, but love the "B"s. |
Posted By: Orange Day Farm
Date Posted: 08 Feb 2021 at 11:22am
|
Yes, I have all three of these styles of rims. The early 37' B 6 bolt rims I am not parting with as they stay on our 37' W "B" I have three or four sets of the cast iron 38' B rims, outter steel bands, cast hubs, and rim locks. I will part with parts or sets. I also have one 39' B rim, the cast center hub is rivited to the outer steel rim. I also have many standard B rims. that bolt on. ------------- Orange Day Farm Clint Worron 30' United, 37' WC, 38' B, 41' C&80 Series cultivators, IB, 51' CA, 42' WF, 49' WD,53' WD&cultivators, 57' WD45&33 Picker, D12, D15HC, 180, All Crop 60, 444 baler, etc... |
Posted By: Orange Day Farm
Date Posted: 08 Feb 2021 at 11:25am
|
uploads/9251/018_.jpg" rel="nofollow - uploads/9251/018_.jpg
------------- Orange Day Farm Clint Worron 30' United, 37' WC, 38' B, 41' C&80 Series cultivators, IB, 51' CA, 42' WF, 49' WD,53' WD&cultivators, 57' WD45&33 Picker, D12, D15HC, 180, All Crop 60, 444 baler, etc... |
Posted By: Orange Day Farm
Date Posted: 08 Feb 2021 at 11:27am
------------- Orange Day Farm Clint Worron 30' United, 37' WC, 38' B, 41' C&80 Series cultivators, IB, 51' CA, 42' WF, 49' WD,53' WD&cultivators, 57' WD45&33 Picker, D12, D15HC, 180, All Crop 60, 444 baler, etc... |
Posted By: HD6GTOM
Date Posted: 08 Feb 2021 at 8:23pm
| Thank you for posting this picture. On another website someone had a bunch of new old stock bolts and nuts. No numbers or anything on them. They came in a bunch of stuff from a sale. No one knew what they were for. Now I can't find the post. |
Posted By: ac89
Date Posted: 20 Mar 2022 at 7:00am
| I need 2 front rims and bolts that hold the wheel on. I also just acquired another 38 this 1 has the old style lock ring rear rim. I'd be interested in 1 of those rear rims if you have any. Thank. |
Posted By: Joe(TX)
Date Posted: 20 Mar 2022 at 2:45pm
I have seen Monroe spring seats on these tractors. I have a used factory seat backrest. DJS sells for $123.00 plus shipping. I will take $50 shipped. They get $89.50 for the cushion. A 28x15 piece of plywood 4ith a 3 1/2 thick foam cushion covered in vinyl. Simple to make. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
ac89 wrote:Posted By: ac89
Date Posted: 20 Mar 2022 at 4:49pm
| Ok I'm interested in the seat backrest. Please PM me your address I'll send you a money order. Or text me at 207-399-2919. Thanks |