Classifieds - 36 m crawler

Print Page | Close Window

36 m crawler

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174188
Printed Date: 22 Dec 2024 at 1:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 36 m crawler

Posted By: ky crawler
Subject: 36 m crawler
Date Posted: 07 Sep 2020 at 9:05pm

Have a 36 m crawler think I have a valve issue it runs little rough have replaced plugs plug wires and had carb rebuilt but I'm afraid to pull head off . i can't seem to find a head gasket listed for a model m crawler.

Replies:

Posted By: T Hunter
Date Posted: 07 Sep 2020 at 10:40pm

I have a M as well, it too ran rough after a mag rebuild and carb rebuild.
Got to asking around and found the "tube" for the intake/exhaust manifold from Mr Fouts and by golly it was running smooth as silk again.
Its a preheat chamber in the middle of your manifold. Its to heat up and run low grade fuel or kerosene i belive.....
Just a suggestion.

Posted By: Dave (Mid-MI)
Date Posted: 09 Sep 2020 at 7:50pm

Didn't the M use the same engine as the UC tractor?

Posted By: ky crawler
Date Posted: 09 Sep 2020 at 9:10pm

Yes I was told the u uc and m had the same engine

Posted By: ky crawler
Date Posted: 09 Sep 2020 at 9:18pm

Thanks I will look in to that. Did yours suck the exhaust pipe flapper down hard occasionally ?

Posted By: T Hunter
Date Posted: 11 Sep 2020 at 9:56pm

My M did not suck the flap down....was very hard to start then ran rough like a miss and surged alot at low speed or no load

Posted By: ky crawler
Date Posted: 12 Sep 2020 at 6:21pm

Mine starts fairly easy and it will run smooth then it will start sucking the flap down then it will run smooth again . I have another problem now I took the top of transmission off to replace a broken steering lever spring and now I don't have any left steering I must have knocked the steering clutch fork out of place when putting the transmission top back on.

Posted By: Pete from IL
Date Posted: 21 Sep 2020 at 7:57pm

Are you wanting to sell your crawler or just asking questions?

Posted By: ky crawler
Date Posted: 23 Sep 2020 at 10:18pm

No it is not for sale . I am just trying to acquire information on parts and learning how to work on it . Everything on it is pretty well wore out so I have a long way to go.