Farm Equipment - WD45 Hydraulics Gasket needed

Print Page | Close Window

WD45 Hydraulics Gasket needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174038
Printed Date: 29 Jul 2025 at 3:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 Hydraulics Gasket needed

Posted By: woodman Steve
Subject: WD45 Hydraulics Gasket needed
Date Posted: 02 Sep 2020 at 5:00pm

My WD45 has the main hydraulic hook up under the seat. It has an in line and out line. The left side has an adjustment screw. There is a cover on the right side that is square with four holes spaced 1 3/8" apart. I need the gasket that goes under this part. My owners manual does not show this part existing. The photo I took will not upload as it is to big.
Who can I call to get a new gasket? Is there a good material that would allow me to make my own! I could text the photos directly to a cell phone if that would help.

Thanks. Steve

-------------
Steve
Two WD45's

Replies:

Posted By: DrAllis
Date Posted: 02 Sep 2020 at 5:46pm

AGCO PARTS BOOKS.com...…..WD/WD45 book...….page 282 at the bottom......70223297 for one gasket and 70223332 for the other gasket. That is the optional "Transport Valve" that not every tractor had. Call your AGCO dealer to see if these numbers are good.

Posted By: woodman Steve
Date Posted: 02 Sep 2020 at 6:01pm

Thank you for the quick response. I will call tomorrow.

Steve

-------------
Steve
Two WD45's

Posted By: DrAllis
Date Posted: 02 Sep 2020 at 7:29pm

My bad. I was looking at the wrong p/n list. Both gaskets on each end are the same 70233240 . Sorry for the confusion.