Snap Coupler Blade to fit CA
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173669
Printed Date: 31 Oct 2024 at 8:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snap Coupler Blade to fit CA
Posted By: ddlong
Subject: Snap Coupler Blade to fit CA
Date Posted: 19 Aug 2020 at 10:29pm
|
I have a Snap Coupler Oxnard blade that fit my WD45 and the D19 my son & I purchased last year. Was planning on mounting the blade to a CA but found out the CA hitch arms are narrower than the other Snap Coupler hitch tractors? So the question is: is there a Oxnard blade made to fit the CA? I’m in the process of purchasing a CA to mount that blade on, but if it will not fit, I’m stuck finding another blade specific to the CA. Don
|
Replies:
Posted By: ddlong
Date Posted: 19 Aug 2020 at 10:31pm
 This is the blade I have.
|
Posted By: AllisD17AndyOk
Date Posted: 19 Aug 2020 at 11:03pm
| Can you drill new bolt holes and move the lift links in to match the ca? |
Posted By: Eldon (WA)
Date Posted: 19 Aug 2020 at 11:44pm
Yes I have sc blades with 2 sets of holes on the top strap. Subtract the distance between both and divide by two and drill another set of holes. ------------- ALLIS EXPRESS! This year: |
AllisD17AndyOk wrote:Posted By: jaybmiller
Date Posted: 20 Aug 2020 at 5:27am
|
When 'sleepy' Mr. Sun decides to get up, I'll go measure my blade 4 hole bar. I KNOW it fit on my '51 CA and it still firs on my D-14s. I need to go remove more 'stuff' from next door so 'two birds thing...' sigh Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Trinity45
Date Posted: 20 Aug 2020 at 7:18am
| I had a snap coupler blade for my CA but sold it years ago, now I wish I had it back. |
Posted By: jaybmiller
Date Posted: 20 Aug 2020 at 7:19am
|
well I still have the blade, but not the CA......sniff,sniff. ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: ddlong
Date Posted: 20 Aug 2020 at 8:33am
|
Anyone able to post a picture of the extra holes or a blade attached to a CA? Thank you for the help!! Don |
Posted By: Eldon (WA)
Date Posted: 21 Aug 2020 at 10:09pm
|
Email me at Ejons@comcast.net and I will send you a pic ------------- ALLIS EXPRESS! This year: |
Posted By: jaybmiller
Date Posted: 22 Aug 2020 at 6:36am
|
the dimensions..... the bar is 1.5" x 31.5" x 3/8" thick with rounded ends inner holes are spaced about 27.5" outer holes are spaced about 30" center hole is ,well, at the center.. all 5 holes are 3/4" diameter I'd make one out of 3/8" plywood first, before making a steel one. wood's a lot easier to drill and cut ! Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |