Print Page | Close Window

175 thermostat?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173430
Printed Date: 06 May 2024 at 7:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 175 thermostat?
Posted By: gleaner1
Subject: 175 thermostat?
Date Posted: 09 Aug 2020 at 8:28am
By chance would anyone have a generic(non Agco) part number for a thermostat for a 175 and also a 185?
Thanks

-------------
ALLIS CHALMERS "The color is orange"



Replies:
Posted By: DSeries4
Date Posted: 09 Aug 2020 at 8:57am
Why not AGCO?  That's where I got mine.


-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: gleaner1
Date Posted: 10 Aug 2020 at 6:02pm
For starters my nearest Agco dealer 2 hours is away plus they could care two ____s about anything allis.
Second the thermostat is most likely made by Stant, Motorad, Decli etc.
Which I could probably pickup at the Napa across the street for a few bucks. Problem is not a single aftermarket thermostat maker lists one.. it’s like a big secret.
Seems the only way is to take them down there, open every box and match them up.


-------------
ALLIS CHALMERS "The color is orange"


Posted By: DougG
Date Posted: 10 Aug 2020 at 7:03pm
That does suck ,,,  185 is common as its a diesel, whats the 175 gas or diesel < as the diesel has a Perkins engine


Posted By: Gary(VA)
Date Posted: 10 Aug 2020 at 7:24pm
There's usually two plates that need to be added on a 175 for the thermostat they list. Sandy Lake has excellent service and probably has what you need in stock.


Posted By: allisbred
Date Posted: 10 Aug 2020 at 8:24pm
2 plates? Mine runs very cool, too cool with the 236 Perkins. Maybe that is the issue.


Posted By: Tracy Martin TN
Date Posted: 10 Aug 2020 at 9:43pm
Originally posted by gleaner1 gleaner1 wrote:

For starters my nearest Agco dealer 2 hours is away plus they could care two ____s about anything allis.
Second the thermostat is most likely made by Stant, Motorad, Decli etc.
Which I could probably pickup at the Napa across the street for a few bucks. Problem is not a single aftermarket thermostat maker lists one.. it’s like a big secret.
Seems the only way is to take them down there, open every box and match them up.
 I went to NAPA, they let me go back and go thru the boxes. I found one that fits. I wrote it down somewhere but can't find it. I am sure someone has it somewhere. Tracy


-------------
No greater gift than healthy grandkids!


Posted By: Fred in Pa
Date Posted: 11 Aug 2020 at 7:09am
Allisbred the Perkins diesel  dose not use the plates that is used in gas engine . JUST a thermostat for diesel. 

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net