Hd11b interchangeable parts with other model dozer
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173400
Printed Date: 01 Dec 2024 at 6:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Hd11b interchangeable parts with other model dozer
Posted By: Hd11Bowner
Subject: Hd11b interchangeable parts with other model dozer
Date Posted: 07 Aug 2020 at 9:34pm
| Hi guys, I have a hd11b and love it, my first Dozer and I'm up to 150 hours rattling around my property cleaning up the paddocks, was wanting to know if f parts from other AC models or other Manufacturers can be used on my model and visa versa, it's serial number is HD11B-7265, wouldn't mind a hydraulic tilt ram, also my blade is a bit knocked around |
Replies:
Posted By: Hd11Bowner
Date Posted: 07 Aug 2020 at 9:37pm
|
Posted By: Hd11Bowner
Date Posted: 07 Aug 2020 at 9:40pm
  
|
Posted By: Hd11Bowner
Date Posted: 07 Aug 2020 at 9:46pm
|
Posted By: HD6GTOM
Date Posted: 08 Aug 2020 at 9:12pm
| Good looking old gal. Hope she serves you well over the years. Can't answer your question though. |
Posted By: gemdozer
Date Posted: 09 Aug 2020 at 5:57am
| The HD9 have the same cluch,transmission,stering cluch,bottom and top rollers, idlers,sprockets |
Posted By: Hd11Bowner
Date Posted: 09 Aug 2020 at 7:03am
|
Thanks thats the kind of info I was chasing, what about the track chains and grousers? |
Posted By: Hd11Bowner
Date Posted: 09 Aug 2020 at 7:18am
| , |
Posted By: Hd11Bowner
Date Posted: 09 Aug 2020 at 7:20am
| https://www.youtube.com/watch?v=--SLEUjt-9g" rel="nofollow - https://www.youtube.com/watch?v=--SLEUjt-9g |
Posted By: DMiller
Date Posted: 09 Aug 2020 at 8:38am
| Track chains are unique to HD9 and 11s also obsolete 7.0 pitch, To rebuild UC is difficult where rollers from CAT can be installed after Truck mods and a sprocket ring swap. Has been a few posts as to that to adopt 6.906 CAT Rails, dimensions are close just not close enough to direct swap. |
Posted By: Hd11Bowner
Date Posted: 15 Aug 2020 at 5:41pm
| What is the method to breaking the track chain, is there a specific link or are all the pins able to be punched out, and what is the best way using basic farm tools from the shed? |
Posted By: DMiller
Date Posted: 15 Aug 2020 at 5:44pm
|
These are dry pin rails, ONE only master pin, will have a dimple or depression in the ends to identify. If has Not been out in recent history will recommend calling a Track Press mechanic, takes upwards of 40 ton to get these moving. OR you can do as I have, LIGHTLY heating the pin eyes of the link, and driving with a 20 pound sledge. This is NOT Farm Shed tool qualified. Some that have been removed and were too loose to remain in place will be Tack Welded into the link eye.  |
Posted By: DMiller
Date Posted: 15 Aug 2020 at 5:48pm
| This is one of my 7Gs, removing the rails, has a section of square pipe welded to the link eye so I can haul back for a true swing on the drift, it was not mushroomed as I started. |
Posted By: Hd11Bowner
Date Posted: 16 Aug 2020 at 9:52pm
|
Thanks DMiller, looks like ill be giving that a go with a nice big Hammer as I have to replace my Idler Bearings, Ill try to replace them without removing the track first and see how that goes |
Posted By: DMiller
Date Posted: 17 Aug 2020 at 8:50am
|
Rails will have to be off to access the bearing retainers as idlers slide out the end of the rail truck. |
Posted By: Hd11Bowner
Date Posted: 04 Feb 2021 at 5:24am
| update, I ended up buying a new set of chains, possibly the last new set in the world lol, I cut the old chains off with a angle grinder, I replaced a leaky lower roller and had the Idlers both serviced, new grouser plate bolts, I can't believe how nice it runs now, I don't even hear the tracks rattling, just the motor humming away, |
Posted By: HD11 owner
Date Posted: 15 Feb 2021 at 5:40pm
| Looks awesome and runs great in the video. |