HD6E Engine Clutch Brake
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=173360
Printed Date: 05 May 2024 at 11:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6E Engine Clutch Brake
Posted By: MJ2Farm
Subject: HD6E Engine Clutch Brake
Date Posted: 06 Aug 2020 at 9:21am
I realize I'm missing some friction material there, but how is this engine clutch brake adjusted? Something to do with that single bolt on top? |
Replies:
Posted By: gemdozer
Date Posted: 06 Aug 2020 at 2:40pm
| That bolt is the adjusting brake screw |
Posted By: HD6GTOM
Date Posted: 06 Aug 2020 at 11:32pm
| Loosen the bolt and turn the adjusting ring. Easier to do it when the engine is out. I cannot remember if you tighten or loosen the ring. |
Posted By: MJ2Farm
Date Posted: 07 Aug 2020 at 6:47am
|
So I fiddled with the clutch brake last night and still haven't figured it out. I loosened that bolt on top but sill wasn't sure how to adjust the brake. I also spent about 30 minutes trying to fish one of my wrenches out of the bottom of the clutch housing. That was fun.
 |