D17 IV deluxe seat
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172680
Printed Date: 25 Nov 2024 at 10:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 IV deluxe seat
Posted By: Ryan Renko
Subject: D17 IV deluxe seat
Date Posted: 08 Jul 2020 at 8:26pm
| I am in the never ending process of restoring this tractor and was working on the deluxe seat area. I ordered new seat cushions and that little rubber bumper from a big name supplier. Its Agco part #229703. I envisioned this bumper being only about a half inch long but the new one arrived and it was 2" long and a 1 1/2 in diameter. Is this right?? Thanks, Ryan |
Replies:
Posted By: DSeries4
Date Posted: 08 Jul 2020 at 9:33pm
|
No, that's way too big. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: DrAllis
Date Posted: 09 Jul 2020 at 7:05am
| Rubber bumper?? to control the "bottoming" of the suspension ?? There isn't any such bumper. |
Posted By: Lonn
Date Posted: 09 Jul 2020 at 7:24am
|
There is some kind of bumper listed on the parts page #70229703 Bumper, Seat ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: DrAllis
Date Posted: 09 Jul 2020 at 7:34am
| That is for the seat pan frame to come up against (at the rear) when the seat is in the down position. I remember it being very short and flat, like less than 1/2" tall. Most tractors don't have them anymore. |
Posted By: TomMN
Date Posted: 09 Jul 2020 at 10:55am
 My series II D15 just has the remnants of one with the rubber missing the outline in the paint shows where it had been:  My Series IV D17 looks like it had something shaped quite different than the old "Button":  |
Posted By: Ryan Renko
Date Posted: 09 Jul 2020 at 11:24am
| As soon as I saw it I thought something didn't look right plus the threaded part wouldn't even fit through the factory hole. Thanks for clarifying. Ryan |
Posted By: Ryan Renko
Date Posted: 10 Jul 2020 at 8:48pm
| Agco part#229703. |
Posted By: EPALLIS
Date Posted: 12 Jul 2020 at 7:40pm
| I have a D-17 Series II and Series IV both with the deluxe seat. Neither one had a button bumper, however there was a place to install one. So, I ordered a couple from DJ's and I installed them both. Seems like a better ride. My 2 cents on the topic. |
Posted By: Ricky D
Date Posted: 12 Jul 2020 at 7:43pm
| Good to know |
Posted By: Ryan Renko
Date Posted: 12 Jul 2020 at 7:45pm
| Hopefully yours is the correct one. I will contact them tomorrow about returning what they sent me. Ryan |
Posted By: DrAllis
Date Posted: 12 Jul 2020 at 9:50pm
| I"m pretty sure that the 70229703 bumper was for the standard equipment metal seat pan, not for the deluxe or super deluxe seats. Look up the seat suspension for a 210 and 220 (which never had a metal seat pan) and you don't find that bumper even listed. |