H3 Bottom track rollers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172612
Printed Date: 15 May 2025 at 9:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: H3 Bottom track rollers
Posted By: bursco
Subject: H3 Bottom track rollers
Date Posted: 05 Jul 2020 at 4:21pm
|
Hello all first time on this site directed here by John from tractorparts I recently acquired a couple of H3 dozers hoping to build one good one but I am having difficulty with bottom rollers, I am looking for some decent used,new or aftermarket bottom track rollers or maybe if someone knows of another roller assy that can be modified to work. I would very much appreciate any help in locating these Thank You |
Replies:
Posted By: DiyDave
Date Posted: 05 Jul 2020 at 4:25pm
I think those are gettin near the unobtanium point, now, but I'll give the post a bump. Several here monitor these type posts.... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: bursco
Date Posted: 05 Jul 2020 at 4:29pm
| thank you I appreciate that |
Posted By: DMiller
Date Posted: 05 Jul 2020 at 4:34pm
| May need to consider looking to other machines as to similar but not exact, redrill roller trucks and set new if at all possible. The old rollers if still relatively sound could be welded up and machined back true if just a hobby machine. |
Posted By: bursco
Date Posted: 05 Jul 2020 at 4:50pm
| I was thinking of welding up a few of the better ac trucks but I also have some of the Berco's where the roller looks good but the internal parts are ate up. |
Posted By: DMiller
Date Posted: 06 Jul 2020 at 6:09am
| Bearings may be available aftermarket or if bushed could have a machine shop rebush and change out seal configuration to something that is available instead of the Allis Bellows seal assemblies. |