Pulling Forum - Governor spring pellet

Print Page | Close Window

Governor spring pellet

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172547
Printed Date: 23 Nov 2024 at 11:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Governor spring pellet

Posted By: mruhlig77
Subject: Governor spring pellet
Date Posted: 03 Jul 2020 at 8:02am

Ran across a RC tractor that was once used for pulling...why was the pellet taken out of the governor spring.....just a plain old spring...thanks in advance..Mark

Replies:

Posted By: cwhit
Date Posted: 03 Jul 2020 at 3:46pm

RPM increase. You wouldn’t believe some of the things I seen done to those things. Wrapped that spring with string, wire ties, bailing wire. About anything to keep the spring from spreading. If you ever watch an AC at a antique pull and the driver never lets go of the throttle, probably has the governor spring tied up.

Posted By: DrAllis
Date Posted: 03 Jul 2020 at 5:20pm

The early (1939) RC's had a different throttle/governor spring and arm as compared to the later models which had a spring/plunger arrangement. I had one of those old ones and the governor worked poorly. didn't take long to round up the parts to update it.

Posted By: mruhlig77
Date Posted: 03 Jul 2020 at 6:34pm

Thanks Dr. Allis...could not find the spring I had in my books...

Posted By: DrAllis
Date Posted: 03 Jul 2020 at 8:38pm

Change it over to like what a C or CA or D14 has. I left the arm that crosses over in front of the engine and welded to it to make it like a newer one. Changed the spring/plunger and arm that they attach to.