D-14 Knob
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=17083
Printed Date: 05 Feb 2025 at 7:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-14 Knob
Posted By: EPALLIS
Subject: D-14 Knob
Date Posted: 23 Aug 2010 at 8:53pm
|
I just found a D-14 with a Woods RM-306. I see this large knob in the lower right hand corner on the instrument panel. Anyone know what this does? Not a choke or light switch, it plulls something under the fuel tank. Thanks in advance.
|
Replies:
Posted By: Rick of HopeIN
Date Posted: 23 Aug 2010 at 8:54pm
belt pulley engage knob
-------------
1951 B, 1937 WC, 1957 D14, -- Thanks and God Bless
|
Posted By: Brad MI
Date Posted: 23 Aug 2010 at 8:55pm
|
Belt pulley engagement control. If you don't have the belt pulley on the tractor and would like to sell the knob and linkage I'd be interested.
|
Posted By: Larry Miller
Date Posted: 23 Aug 2010 at 9:18pm
That control rod seems to be expensive - only saw one and more than I would pay. I got a cheaper PTO control rod from a WD or 45. Bend it a little, then cut center part out, over lap and weld to length. Pretty easy to do and covered up with the side panel.
-------------
I used to be young and stupid, now I am not young anymore.
|
Posted By: EPALLIS
Date Posted: 29 Aug 2010 at 7:32pm
|
Thanks Rick. I pulled the knob out and there is a belt pulley installed there but nothing happened. What should I look at next? Thanks in advance.
|
Posted By: D-17_Dave
Date Posted: 29 Aug 2010 at 8:19pm
|
The crank lever for the belt pulley is made into the torque tube. If you have no pulley on the outside of the frame then there is nothing inside connecting the crank arm. It just hangs inside there. It would be nice if you couls post some pics and demintions of the linkage as I need this linkage setup.
|
Posted By: RichinWis
Date Posted: 29 Aug 2010 at 8:30pm
|
That linkage and knob setup is very simple to make,if I can find the one I have I will measure it for you guys. Thanks Rich
|
Posted By: EPALLIS
Date Posted: 29 Aug 2010 at 10:27pm
|
There is what appears to be a pulley on the outside. When I pull the knob out the pulley does not turn. Is there another step to complete? Thanks in advance.
|
Posted By: bigfish_Oh
Date Posted: 29 Aug 2010 at 11:48pm
make sure it is in the lever(if your side panels are hiding seeing it). let the clutch out.
-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually
|
|