Farm Equipment - 190XT PD

Print Page | Close Window

190XT PD

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170808
Printed Date: 21 Aug 2025 at 2:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190XT PD

Posted By: NDBirdman
Subject: 190XT PD
Date Posted: 04 May 2020 at 10:43am

Does the 190XT power divider share tractor hydraulics or is it separate? If separate, where is that drain plug/fill and how much/type fluid? The power divider works good between lo/hi but does not engage... hard, more like easily slips into high.

I drained the hydraulic fluid, put a new filter on and filled. Have not operated it since doing so as I'm awaiting a water pump.

-------------
1955 WD45 S#205467, 190XT #6652 DXT

Replies:

Posted By: DrAllis
Date Posted: 04 May 2020 at 12:47pm

Hydraulic system is the oil to apply and lube the Power Director clutch. Two drain plugs. Takes about 5+ gallons of oil.

Posted By: Joe(TX)
Date Posted: 04 May 2020 at 5:51pm

Both drain plugs are on the torque tube.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A