Farm Equipment - Need info on rebuilding hydraulic cylinder

Print Page | Close Window

Need info on rebuilding hydraulic cylinder

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170740
Printed Date: 13 Oct 2025 at 3:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need info on rebuilding hydraulic cylinder

Posted By: Aaron123
Subject: Need info on rebuilding hydraulic cylinder
Date Posted: 01 May 2020 at 8:05pm

Need info on rebuilding hydraulic cylinders on my 1954 Allis chalmers WD45.. they are leaking and I got the stuff to rebuild it I just not sure how to do it.
Can any on on here walk me through the rebuild? Picture would be nice. If possible.

Replies:

Posted By: SteveM C/IL
Date Posted: 01 May 2020 at 8:13pm

Rams are usually pitted/scored bad but beyond that,take a pipe wrench or big channel lock and tighten packing nut and see what results are.....otherwise you remove that nut and dig out packing then install new

Posted By: Aaron123
Date Posted: 04 May 2020 at 8:19pm

Ok thanks