Farm Equipment - d-14 voltage regulater

Print Page | Close Window

d-14 voltage regulater

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170539
Printed Date: 12 Aug 2025 at 2:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d-14 voltage regulater

Posted By: tractorboy
Subject: d-14 voltage regulater
Date Posted: 25 Apr 2020 at 3:10pm

I took the mounting bolts out to move the voltage regulator to access the starter last week . I got starter rebuilt & put back in now it wont charge at all [Batt reading 12.54 volts while running]I seem to have slight stray voltage on the mounting tabs which I don't understand since they appear to be isolated in rubber. I didn't remove any wires going to the regulater & they are all tight. maybe it needs to be"'flashed" , but I 'm not sure how to do this since this tractor is still very original, POSITIVE GROUND. thanks, keith so va

Replies:

Posted By: Alvin M
Date Posted: 25 Apr 2020 at 3:51pm

Regulator Must Be Grounded To Work

Posted By: tractorboy
Date Posted: 25 Apr 2020 at 4:14pm

By "grounded" do you mean the mounting tabs??

Posted By: Alvin M
Date Posted: 25 Apr 2020 at 4:35pm

Yes It Also Has A Wire From Reg To Mt Taps Make Sure That It Sill There

Posted By: tractorboy
Date Posted: 25 Apr 2020 at 4:48pm

ok thanks !