Farm Equipment - 8070 temp gauge

Print Page | Close Window

8070 temp gauge

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170328
Printed Date: 03 Sep 2025 at 8:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8070 temp gauge

Posted By: Tenn allis
Subject: 8070 temp gauge
Date Posted: 20 Apr 2020 at 2:03pm

My temp gauge quit reading so we replaced the gauge with a salvage one Then we put a new sending unit on it If I take the wire off the sending unit it reads cold when I put it on it pegs it out on the hot side. This is before we crank it for the day. Sending unit come from Napa this is what it was doing before we did anything to it. What should I do next

Replies:

Posted By: Alvin M
Date Posted: 20 Apr 2020 at 2:24pm

Use Agco # 70264403 Sender

Posted By: Tenn allis
Date Posted: 20 Apr 2020 at 3:08pm

Does it take an AGCO sender and not just a generic one like I got

Posted By: DrAllis
Date Posted: 20 Apr 2020 at 3:58pm

That would probably be affirmative.

Posted By: Tenn allis
Date Posted: 20 Apr 2020 at 6:58pm

Thanks