Farm Equipment - D 12 Manifold installation

Print Page | Close Window

D 12 Manifold installation

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169985
Printed Date: 25 Sep 2024 at 10:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 12 Manifold installation

Posted By: Tyee II
Subject: D 12 Manifold installation
Date Posted: 09 Apr 2020 at 9:26pm

I am ready to put my D 12 manifold back together and would like to know a what is recommended to use as a sealant on the 2 studs that enter the cooling passage ? I am thinking anti seize on the remainder of the studs ? New studs, brass nuts should I be using lock washers alone ( that is what it had previously ) should there be a flat washer between the lock washer and the manifold ? Is there a recommended torque for these ?

Tightening pattern using center out sequence ? Thanks for any info you can provide.

Replies:

Posted By: Ed (Ont)
Date Posted: 09 Apr 2020 at 9:34pm

Use permatex number 2 on the ones that go into coolant or oil. That’s what it is for.