Need HD5G transmission parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169615
Printed Date: 23 Nov 2024 at 4:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need HD5G transmission parts
Posted By: youngrkp
Subject: Need HD5G transmission parts
Date Posted: 30 Mar 2020 at 7:49am
|
The transmission on my HD 5G locked up and I am needing the reverse idler gear needle bearings and also the bearings for the input shaft. Where could I find them? What are their part numbers? Thank you I forgot to mention that my crawler has the older single speed reverse transmission. |
Replies:
Posted By: CAL(KS)
Date Posted: 30 Mar 2020 at 3:18pm
|
Gemdozer probably has it ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: Ian Beale
Date Posted: 30 Mar 2020 at 4:20pm
|
One of our local suppliers has a well thumbed paper copy of an (IIRC) "IBR Bearing Replacement catalogue". If you have the manufacturer's bearing part numbers it gives you the original bearing manufacturer and their part number(s). For instance it went from the Allis part numbers for needle bearings in the steering box of an AC 45 grader to the Torrington numbers - which were bearings still available. So if someone has access to one of those - - - . Even better is the parts book for our FA 10 dozer has a table at the back which does the same thing for its Fiat bearing part numbers - though that isn't going to help your enquiry
|
Posted By: youngrkp
Date Posted: 31 Mar 2020 at 9:08am
| What is the best way to get a hold of Gemdozer? |
Posted By: gemdozer
Date Posted: 31 Mar 2020 at 1:01pm
|
I have these used transmission parts . gemdozer@hotmail.com
|
Posted By: dadsdozerhd5b
Date Posted: 14 Apr 2020 at 8:17pm
|
new are available. I put them in a trans last year. get part numbers and search for on the internet, look hard and you can find less expensive but good bearings, sometimes new old stock. I will see if I can find my notes. ------------- HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE. |
Posted By: Coke-in-MN
Date Posted: 18 Apr 2020 at 10:34pm
|
AC used stock bearings and can be sized using dementions from bearing house . Well all except front idler bearings , cups are standard cone is hard to find . rear Link belt outboard axle bearings are also a hard to find bearing and kind of AC only this is HD5 and HD6 - unsure on larger machines ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: DMiller
Date Posted: 19 Apr 2020 at 5:24am
Similar style my HD7G |
Coke-in-MN wrote: