Roto-Baler Belts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169081
Printed Date: 18 Jul 2025 at 8:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Roto-Baler Belts
Posted By: NE GA Allis
Subject: Roto-Baler Belts
Date Posted: 13 Mar 2020 at 3:40pm
|
Hey everyone, I’m about to buy a new set of belts for my Roto-Baler, only question is, what ply were the original belts? I have sourced at least 3 different places that have the belts, all offered with clipper lacing. America’s Belting = 2 ply Baler Belting(usabelting.com) = 3 ply eBay = 3 ply Anyone know the ply needed for these balers or has anyone personally bought a set that could tell me which ply rating would be better? Thanks ------------- Keeping Allis alive with: 2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |
Replies:
Posted By: DiyDave
Date Posted: 13 Mar 2020 at 6:08pm
IIRR, originals were 2 ply. When replacing them, use the OEM style lacings, the fancy new lacings are too wide to go over the skinny rollers, on the roto-baler, without undue stress, and early failure... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Krazy Karl
Date Posted: 13 Mar 2020 at 6:38pm
| 2 ply is what I was told to do when I was looking |
Posted By: NE GA Allis
Date Posted: 14 Mar 2020 at 1:05pm
|
Thanks for the help. I’m going to get 2 ply belts. ------------- Keeping Allis alive with: 2 B’s, 1 C, 6 CA’s, 2 WD’s, 1 WD45, 3 D15D’s, 1 D17 |