Farm Equipment - 1950 B governor weights/pins

Print Page | Close Window

1950 B governor weights/pins

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=169067
Printed Date: 06 Sep 2025 at 10:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1950 B governor weights/pins

Posted By: cdsloop
Subject: 1950 B governor weights/pins
Date Posted: 12 Mar 2020 at 11:57pm

I'm continuing to work on refurbishing my 1950 B. It's currently in a state of disassembly, and I am working on miscellaneous things while my machinist cousin repairs the manifold. The pivot shaft for the throttle was frozen, so I removed the governor cover to get it freed up, which was successful. With the cover off, I discovered that the pins for the weights are severely worn. The pivot hole in the gear seems ok. Is there anyone that offers just the pins and weights, or just the pins? I'm trying to keep this on a shoestring budget. I see several vendors offer the pins and weights separately for the D series, but none seem to do that for the B/C, only complete governor assemblies. Can someone point me in the right direction? Thanks.

Replies:

Posted By: MACK
Date Posted: 13 Mar 2020 at 7:45am

Your Agco dealer should have them. MACK

Posted By: Gerald J.
Date Posted: 13 Mar 2020 at 9:15pm

The shop manual might help:

http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf" rel="nofollow - http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf

Gerald J.

Posted By: Albert
Date Posted: 13 Mar 2020 at 9:23pm

PM sent we can help you out