Rubber bushing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168819
Printed Date: 11 May 2024 at 6:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rubber bushing
Posted By: milomilo
Subject: Rubber bushing
Date Posted: 03 Mar 2020 at 9:06pm
|
Where would be the best place to find a replacement rubber bushing on my 1967 190XT that is used at the top of the seat spring that cushions the seat from bouncing? ------------- Chris (WY) |
Replies:
Posted By: pump grump
Date Posted: 03 Mar 2020 at 9:30pm
|
I got my bushing from my agco dealer . |
Posted By: CTuckerNWIL
Date Posted: 03 Mar 2020 at 10:16pm
|
https://www.ebay.com/i/333528437455?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=333528437455&targetid=937869230527&device=c&mktype=pla&googleloc=9021899&poi=&campaignid=9423618897&mkgroupid=98498887191&rlsatarget=aud-762207186714:pla-937869230527&abcId=1141016&merchantid=113623190&gclid=CjwKCAiAnfjyBRBxEiwA-EECLBppIT1jCb016IdIpUZpYuKHqxvTQMw58PLRID93kPW6phCxdYdKZBoCgMEQAvD_BwE" rel="nofollow - Right here, maybe. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: DiyDave
Date Posted: 04 Mar 2020 at 4:37am
Well, Now we know the part no is 70222438, and the price to beat is $10.99! ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: jaybmiller
Date Posted: 04 Mar 2020 at 5:27am
|
OK, I got 'fruga'l last week, I used a section of rubber gasline hose,Something that was 1"+ OD, 5/8" ID. It fit GREAT for the D-14 seat shock upper rubber bushing. It went on a lot quicker thn removing the 2 steel bushings ! ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: ACinSC
Date Posted: 04 Mar 2020 at 6:21am
| Yeah Jay I just replaced the seat shock on my D 15 . One of those upper steel spacers sure didn't wanna come off . Guess it had been on since 1961 . Thanks |
Posted By: CTuckerNWIL
Date Posted: 04 Mar 2020 at 6:25am
Looks like 70222488 to me ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
DiyDave wrote:Posted By: ac-mike
Date Posted: 04 Mar 2020 at 8:04am
|
THE PARTS TO BEBUILD THESE SEATS ARE INEXPENSIVE. THE SHAFTS ARE 1/2" COLD ROLL STEEL, THE BUSHINGS ARE FACTORY STANDARD, YOU CAN FIND THEM AT ANY INDUSTRIAL SUPPLY. THE RUBBER BUSHINGS COME FROM SEVERAL SOURCES SUCH AS AUTO PART STORES AND OTHER MANUFACTURES. I USUALLY GET THOSE FROM TISCO AND I BELIEVE AN INTERNATIONAL HARVESTER NUMBER. IF YOU NEED HELP SEND ME A PM. MIKE ------------- D-12III, 200D, 170G, HD-3, D19D 3pt, D17D High Crop, WD45G p/s, D15IID, D15IIG, D15G IND, 655, (3)WD45D p/s, 700, 816 |
Posted By: DiyDave
Date Posted: 04 Mar 2020 at 5:02pm
I stand corrected. eyes ain't that good, and the memory is worse... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |