Farm Equipment - diameter of 170 steering shaft

Print Page | Close Window

diameter of 170 steering shaft

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168698
Printed Date: 05 Jun 2024 at 2:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: diameter of 170 steering shaft

Posted By: Steve A
Subject: diameter of 170 steering shaft
Date Posted: 28 Feb 2020 at 5:03pm

Would anybody happen to know the diameter of the steering shaft-vertical shaft the steering wheel splines onto--just below the wheel? Dad's lifts up and disconnects from the orbital pump, and I'd like to make a collar to hold it down. Problem is it's 250 miles away to measure..

Replies:

Posted By: SteveM C/IL
Date Posted: 28 Feb 2020 at 8:34pm

No experience on that model here but think something is wrong with current set up. Doubt it left factory being able to do what that one does. Something missing?

Posted By: Joe(TX)
Date Posted: 28 Feb 2020 at 9:06pm

It sounds like you lost the snap ring on the shaft that locates it in the support tube.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: SteveM C/IL
Date Posted: 28 Feb 2020 at 9:44pm

Pt # 70244457 ,one under wheel and one in the tube to keep it from pulling out...page 212 agcopartsbooks.com