Farm Equipment - 8010 transmission problems

Print Page | Close Window

8010 transmission problems

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168187
Printed Date: 03 May 2025 at 9:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8010 transmission problems

Posted By: brouillettefarms
Subject: 8010 transmission problems
Date Posted: 09 Feb 2020 at 4:46pm

I have an 8010 with a power director, PD works fine, the problem is with the range, it will move fine in low range if you put it in high range it will not move and it will stall the engine, it will not free roll in high either, if you put it in park and have the transmission in gear it will stall the engine and it will not free roll, the range will not go into nuetral when it's in nuertal position it pulls like it's in low range. Any help would be greatly appreciated

Replies:

Posted By: DrAllis
Date Posted: 09 Feb 2020 at 4:55pm

Sounds like low range lower gear is seized on the pinion shaft. A bad thing.

Posted By: brouillettefarms
Date Posted: 09 Feb 2020 at 5:16pm

That's kinda what I was thinking, gonna try to pull the fuel tank and remove the range shift fork cover a see how it looks

Posted By: DrAllis
Date Posted: 09 Feb 2020 at 5:29pm

You probably won't see much. Maybe some bluing or discoloration of the low range gear down close to the pinion shaft. Pull the cab floor and look in from the top. You have to do this anyway to disconnect the fork to remove the shift cover.