Farm Equipment - 200 pto problem

Print Page | Close Window

200 pto problem

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167733
Printed Date: 05 May 2024 at 9:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 pto problem

Posted By: royce vallejo
Subject: 200 pto problem
Date Posted: 24 Jan 2020 at 11:04pm

I have a 200 with a pto problem. It slips on my 425 new Holland baler. I replaced the driven and driving plates. it has the 540 and 1000 rpm pto speed. any ideas why it can't even turn a 1012 new Holland bale wagon

Replies:

Posted By: HD6GTOM
Date Posted: 25 Jan 2020 at 12:30am

Mine did the same thing. It was a hyd valve problem. I do not remember where or what it took to fix it. It's been 5 0r 6 years ago.

Posted By: MACK
Date Posted: 25 Jan 2020 at 7:52am

Sounds like pressure needs to be checked. MACK

Posted By: tbran
Date Posted: 25 Jan 2020 at 8:50am

IF you idle the tractor to 1000 rpm , put it in high range 4th gear and slowly let out the foot clutch - does the PD clutch slip as well ?

-------------
When told "it's not the money,it's the principle", remember, it's always the money..

Posted By: royce vallejo
Date Posted: 25 Jan 2020 at 10:08pm

I replaced the main cluch during that time. This is my first ac 200. I am going to have to figure out where the pd cluch is. thanks

Posted By: royce vallejo
Date Posted: 25 Jan 2020 at 10:22pm

I have not tested the pressure but the three point and the bucket goes up and down no problem. I will test the pressure. thanks

Posted By: royce vallejo
Date Posted: 25 Jan 2020 at 10:27pm

thanks for the info on a possible hyd valve prob.