Stack Weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=16757
Printed Date: 05 Feb 2025 at 8:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Stack Weights
Posted By: Shane H. (Mi)
Subject: Stack Weights
Date Posted: 18 Aug 2010 at 6:08am
|
How much do they weigh? I don't have a set, and I'm beginning to do my "homework".
Thanks!
-Shane'r
|
Replies:
Posted By: KevinC(MD)
Date Posted: 18 Aug 2010 at 7:34am
|
Mine weigh 75 lbs. a piece on my WD 45. There might be some slight differences, but they all appear the same.
|
Posted By: DSeries4
Date Posted: 18 Aug 2010 at 11:30am
|
75lbs is about right. Good luck finding them though. They tend to be very pricey when you do find them too.
|
Posted By: Brian F(IL)
Date Posted: 18 Aug 2010 at 12:58pm
|
I'd love to find some around me for my WD-45 but I haven't had any luck yet.
|
Posted By: Shane H. (Mi)
Date Posted: 18 Aug 2010 at 5:55pm
|
I wonder if i could make "something close", to utilize as a stack-weight 'replacement'. 1" plate steel, similar in dimension, mounted in a similar fashion. I wonder if the 'correct police' would take issue with it at the pulls requiring 'stock weights'?
-S
|
Posted By: Skyhighballoon(MO)
Date Posted: 18 Aug 2010 at 6:59pm
Shane - reproductions of those weights and the mounting "J-bolts" are available from vendors...not sure who all carries them other than Norm. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Dave (NE)
Date Posted: 18 Aug 2010 at 7:33pm
|
saw them for $75 a piece at the GOTO in albert city. seemed high.
|
Posted By: Rfdeere
Date Posted: 18 Aug 2010 at 8:04pm
$75 a piece for Wd, WD45, and D series stack wieghts? I would buy every one I could get my hands on for that price !!!
-------------
Randy Freshour,Member Indiana AC Partners,
http://www.rumelyallis.com" rel="nofollow - http://www.rumelyallis.com
|
Posted By: Brian G. NY
Date Posted: 18 Aug 2010 at 9:16pm
|
Yeah, me too!! I have only two and I need just one more to make the normal set of three. I saw a nice shiny set of 3 with bolts and brackets go for $650 on e-pay last year.
A set of 2 rusty weights (no attaching hardware)went for $320.
|
Posted By: Butch(OH)
Date Posted: 19 Aug 2010 at 6:31am
|
Ya, I'll take a hit of them $75 stack weights too. I lucked out and found one at a non A-C auction for cheap but that is a rare occurance Cheapest I have seen for the masses was a fellow at Dale's show had the repros for $135. I need the irons to mount them on our D-19 but am baulking at paying the $200everyone wants for it.
|
Posted By: David(Stockbridge)MI
Date Posted: 19 Aug 2010 at 6:46am
List price is $149.95 a weight, bracket mount for D-series is $195.00. I sell them for a $130.00 a weight on special order only. Don't like to haul them around to shows. At $75.00 I'll buy as many as I can get. mailto:djstractorparts@yahoo.com - djstractorparts@yahoo.com
-------------
All "NEW" Web Site http://www.djstractorparts.com
2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler
|
|