D15 series II Front Oil Seal Replacement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167456
Printed Date: 06 May 2024 at 10:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15 series II Front Oil Seal Replacement
Posted By: GregLawlerMinn
Subject: D15 series II Front Oil Seal Replacement
Date Posted: 16 Jan 2020 at 12:04pm
Has power steering. Front oil seal is dripping. Can I replace the seal without pulling the front support from the tractor?
-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC
|
Replies:
Posted By: PaulB
Date Posted: 16 Jan 2020 at 1:01pm
It will be a lot easier in the long run if you pull the front support and oil pan off along with the timing cover if you only want to do it once.
-------------
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY
|
Posted By: DSeries4
Date Posted: 16 Jan 2020 at 4:52pm
Did my D14 last winter. Best to pull the axle, you need a gear puller to pull the crank pulley off. You will also need to remove the oil pan to get the seal and timing cover centered properly. Going to be doing the neighbor's D15 in the next couple of weeks.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|