Farm Equipment - Allis 185 Hydraulic

Print Page | Close Window

Allis 185 Hydraulic

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167437
Printed Date: 03 May 2024 at 8:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis 185 Hydraulic

Posted By: Kenny L
Subject: Allis 185 Hydraulic
Date Posted: 15 Jan 2020 at 7:16pm

When checking the Hydraulic level on a 185 should you screw in the dip stick our just set it in the opening for proper level.I have a manual but unfortunately it doesn't specify.

Replies:

Posted By: DougG
Date Posted: 15 Jan 2020 at 7:46pm

I've always screwed it in,, seems the right way to do it- it seems like a poor design compared to the tranny fill, as dirt can fall into the hyd hole very easy

Posted By: KJCHRIS
Date Posted: 15 Jan 2020 at 10:50pm

I'm with Doug, have always had it screwed in fully, wipe dirt away.

Ops Man'l says; Lower lift arms, fully retract any external hydr rams, run engine 3 minutes at high idle, shut off engine. Immediately remove dipstick and check oil level.

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,