D14 Power director
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167389
Printed Date: 28 Apr 2024 at 10:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 Power director
Posted By: DSeries4
Subject: D14 Power director
Date Posted: 13 Jan 2020 at 7:45pm
|
My mechanic finally finished rebuilding the transmission in my 1959 D14 - it was only in his shop for 6 years! Now that it is as good as new, the hand clutch needs rebuilding too. The rear hub clutch (part #70228071) is what I am looking for. My AGCO dealer says they are no longer available. You can see mine has chunks missing out of the teeth. Looking for one in excellent condition or NOS.  I have also heard the clutch plate assembly (Part #70232080) is available aftermarket. Does anyone have a price for these? Many thanks! ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Replies:
Posted By: Stan R
Date Posted: 14 Jan 2020 at 5:43am
| https://www.ebay.com/itm/Hub-clutch-Rear/292880250877?hash=item443105f7fd:g:9O8AAOSwliFcGqlC" rel="nofollow - ebay |
Posted By: jaybmiller
Date Posted: 14 Jan 2020 at 5:54am
|
wife would say you need to come down and buy #3 from me..... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Brian Jasper co. Ia
Date Posted: 14 Jan 2020 at 11:21am
|
All of the friction and steel separator plates are available both from Agco and aftermarket. I went through my clutch on my D17 and if I remember correctly there are 7 of each plate and the steels were about $40 each and the friction about $60 each. Then there's the roller lock plates and a center plate. To fix the clutch correctly so it stays fixed is not an inexpensive endeavor. Off the top of my head you will also want the 6 rollers, new pin lock rings, 6 separator springs, new O rings for the power director shaft and PTO lever shaft, new transmission input shaft seal, new PTO shaft seal on the transmission side. I might be leaving something out, but this is a very good start to do a first class repair. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: DSeries4
Date Posted: 18 Jan 2020 at 9:17am
|
I have most of the parts I need, except for the rear hub clutch (part #70228071) - pictured above. I posted an ad in the classifieds. Please send me a PM if you have a good one. Thanks very much! ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: PaulB
Date Posted: 18 Jan 2020 at 9:50am
|
If you were not North of the boarder, I have a complete D15 power director I'd sell you. Unfortunately I've had nothing but problems with dealing into Canada. ------------- If it was fun to pull in LOW gear, I could have a John Deere. If you can't make it GO... make it SHINY |