Print Page | Close Window

D17 Series 1 engine removal

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167367
Printed Date: 29 Mar 2024 at 6:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D17 Series 1 engine removal
Posted By: PA185
Subject: D17 Series 1 engine removal
Date Posted: 13 Jan 2020 at 9:42am
Pulling the engine out of my 1959 series 1 D17 gas with power steering. What all is involved or needs to be removed to pull the engine out? If I take the bell bolts out and disconnect the power steering lines it looks like I can pick it right up out without splitting the tractor. Other than some misc wires, lines, etc am I missing anything?



Replies:
Posted By: bradley6874
Date Posted: 13 Jan 2020 at 10:12am
Has to be split motor has to go straight forward about 8 inches to get the clutch and fly out of the bell housing

-------------
You can wash the dirt off the body but you can’t wash the farmer out of the heart and soul


Posted By: AaronSEIA
Date Posted: 14 Jan 2020 at 2:23pm
Front pedestal and frame rails have to come off.  You can move it all as an assembly if you loosen the rails at the pedestal and have 2 strong friends.  Myself and my 11 year old boy rolled the front out from under my series 2 wide front.  It'd be a LOT easier without power steering.  That cylinder made it fun clearing the front cross member.
AaronSEIA


Posted By: MACK
Date Posted: 16 Jan 2020 at 6:41am
Be sure to tie the tie rods to wishbone.     MACK



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net