Farm Equipment - WC steering adjustment???

Print Page | Close Window

WC steering adjustment???

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=16724
Printed Date: 05 Feb 2025 at 4:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WC steering adjustment???

Posted By: split51
Subject: WC steering adjustment???
Date Posted: 17 Aug 2010 at 1:14pm

How do you adjust for slack between the worm gear and steering gear on a 35 WC narrow front?

Replies:

Posted By: skipwelte
Date Posted: 17 Aug 2010 at 2:18pm

Might be the keyway in the bottom where the spindles go on the verticle shaft worn. Also check the looseness in the steering Ujoint. Thats about it. HTH good luck

Posted By: Good
Date Posted: 17 Aug 2010 at 2:19pm

Usually the slop in that is from the pedistal housing the rack shaft goes down through there is no bushing there but you can machine to put one there.the only adjustment up there is to take shims out to tighten worm gear bearings.

-------------
B212,716,two 314H's,WC,WD,D19,190XT