Model 64 snowblower
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167123
Printed Date: 28 Apr 2024 at 8:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Model 64 snowblower
Posted By: Jschlangen
Subject: Model 64 snowblower
Date Posted: 04 Jan 2020 at 3:52pm
|
Trying to find or make a snowblower fit my 5020. Looking for pictures of how the model 64 hooks up to the front PTO. Thanks in advance for any help.
|
Replies:
Posted By: Meanolallis
Date Posted: 11 Jan 2020 at 9:51am
|
There’s a fairly complex mess of heavy brackets, belts, and pulleys. For some reason the snowblower electric clutch part number is different than the mower deck electric clutch part number. I have a set of brackets and the snowblower manual if you need something specific. The whole setup is kinda heavy and I think it was prone to breaking the front end of the tractor and the brackets. Also need a hydraulic cylinder and rear port. You might be better off getting a rear snowblower. Not sure if the reverse gears are adequate for backing up with one. I am very sure that the actual snowblower is a Mckee that Allis or Simplicity adapted to fit the tractor with a big mess of bracketry.
|
Posted By: EricPA
Date Posted: 10 Feb 2020 at 8:11pm
the electric clutch will run both the belly mower and snow blower as I have both. there is a very heavy front mounting bracket that bolts to the frame and I haven't had any problems with it. as for the snowblower itself it has a Made in Canada tag riveted to it. if you would like pictures send me a phone number and I can text you some
-------------
Life is tough,but it's tougher when you're stupid. - John Wayne
|
|