Construction and other equipment - 371 jimmie engine from hd 6 to hd 6

Print Page | Close Window

371 jimmie engine from hd 6 to hd 6

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167084
Printed Date: 05 May 2024 at 2:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 371 jimmie engine from hd 6 to hd 6

Posted By: shanksmare
Subject: 371 jimmie engine from hd 6 to hd 6
Date Posted: 02 Jan 2020 at 12:45pm

was looking at swapping a 371 jimie engine from hd 7 in to an hd 6 with a 4 cyn budda are they fairly easy to swap?

Replies:

Posted By: dadsdozerhd5b
Date Posted: 04 Jan 2020 at 9:02pm

I have seen a 3-71 put in the HD5 which is the same rear end and such, slightly shorter front than the 6 I think. Clutch may not bolt up. If a dozer should be easier than a loader. Engine may move back toward operator slightly but I think it is doable.

-------------
HD5B, HD5G, (2) FARMALL A's, CUB. DO IT RIGHT THE FIRST TIME, IGNORE THE LAUGHTER. FLANNEL IS ALWAYS IN STYLE.

Posted By: Lee Bradley
Date Posted: 06 Jan 2020 at 3:23pm

You will need to find a clutch assembly like the HD-5 uses. Output from the clutch to a driveline. The HD-7 engine bolted to the transmission bellhosing and the clutch was on the transmission input shaft. No driveline in the HD-7s.