D14 drawbar support
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166829
Printed Date: 24 Apr 2025 at 2:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 drawbar support
Posted By: BackhoeBob
Subject: D14 drawbar support
Date Posted: 21 Dec 2019 at 5:01pm
| Well, I have noticed what is probably another conundrum. I ordered a 3 point hitch conversion for my D14 the other day. I haven't received it yet. But have noticed a big problem. My drawbar support widens out and isn't straight down. I've looked around on here and found that some changes were made after ser#19000. Mine is 197??. I'm pretty sure this 3 point conversion won't work with my drawbar support. Am I right? And are the straight ones available anywhere? I found one, but was out of stock and way overpriced. Any help on this? Thanks. |
Replies:
Posted By: DiyDave
Date Posted: 21 Dec 2019 at 8:17pm
Your tractor prolly has a support bracket offa D-15, in place of the D-14 proper bracket. There are still some, laying around. Check with Sandy Lake, a site sponsor... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: BackhoeBob
Date Posted: 21 Dec 2019 at 9:26pm
| Thanks Dave. Others on this forum have said the wide support came on D14's after 19000 ser#. I'm the 4th owner of this tractor. Talked with the 2nd owner about this and he said that support was always on it. Doesn't really matter. I just need to know if this conversion will work with this support. It's the conversion that OK tractors sells. Thanks again. |
Posted By: jaybmiller
Date Posted: 22 Dec 2019 at 6:31am
|
I understand there are 2 types, regular and heavy duty, parts book shows them and I have both lying on the shelf here in Ontario. I've never used drawbars in 20 years, since I made my 'carryall'. It's too bad shipping is $$$ and a PITB, sigh. Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: DSeries4
Date Posted: 22 Dec 2019 at 9:23am
|
My 59 D14 (#19299) also has the wide hanger. I think DJs or Steiners carries new narrow ones. IF not, someone here might have a good used one. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: jaybmiller
Date Posted: 22 Dec 2019 at 9:26am
|
DS4... need another ? at least your 'close' to me...... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: DSeries4
Date Posted: 22 Dec 2019 at 9:29am
|
Sorry Jay, I've got all I need for my D14s and 15s. Now if you had any D21 parts, we would be talking for sure! ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: WD45Diesel57
Date Posted: 24 Dec 2019 at 7:33am
|
from what ive read and been told by other guys, the D14 from 1957-59 had the narrow draw bar hanger and 1960 when they went black bar grille the did a few changes to them with wide swing drawbar hanger, 12 volt, longer pto handle and a few other little things for the last year ------------- 1-B's, 2-C, 2-CA's,2-WF, 1-WC,1-G, 3-WD's, 2-WD45, 1-RC, 1-D17 Diesel, 1-D14, 2-D15,1-D17 row crop,1-D19 gas and All Crop 40,60,66,72,90 and 100 |
Posted By: DSeries4
Date Posted: 24 Dec 2019 at 9:37am
|
Early 59 was the changeover year Allen. My 59 has all the updates you mentioned that my 58 doesn't have. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: WD45Diesel57
Date Posted: 24 Dec 2019 at 10:16am
|
ok good to know, I bought a 1960 few summers back and that's what someone had told me! always something to learn ------------- 1-B's, 2-C, 2-CA's,2-WF, 1-WC,1-G, 3-WD's, 2-WD45, 1-RC, 1-D17 Diesel, 1-D14, 2-D15,1-D17 row crop,1-D19 gas and All Crop 40,60,66,72,90 and 100 |
Posted By: frnkeore
Date Posted: 25 Dec 2019 at 1:43pm
|
I recently bought a black bar, D14. I haven't seen any others in my area so, could someone post a picture of the late draw bar mount so, I'll know what I have. Someone cobble together a 3 point on mine and I'd like to get back to original. ------------- Frank 1959 D17 Series I #24001+, '59 D14 '55 & '59 Ford 850 & 861 Ferguson TO 35 Deluxe, Oliver 70 and 5 more. |
Posted By: BackhoeBob
Date Posted: 25 Dec 2019 at 3:55pm
| Frmkeore, are you near Indiana? I have the drawbar and support for the black bar grill models. The heavy duty one. |
Posted By: frnkeore
Date Posted: 26 Dec 2019 at 2:30am
|
I'm in Oregon, 80 miles from the pacific ocean. ------------- Frank 1959 D17 Series I #24001+, '59 D14 '55 & '59 Ford 850 & 861 Ferguson TO 35 Deluxe, Oliver 70 and 5 more. |