D-19 Lift Arms
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=16661
Printed Date: 05 Feb 2025 at 5:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D-19 Lift Arms
Posted By: KenBWisc
Subject: D-19 Lift Arms
Date Posted: 16 Aug 2010 at 2:09pm
I recently bought a D-19 with worn lift arm-rock shaft splines. Because mine are so worn they are nothing to remove however, I just spoke with a guy who said it is almost impossible to separate them when the splines are good. Is this the case? Seems like some soaking and heat and most anything comes apart.
Doesn't the rock shaft just slide out of the housing?
-------------
'34 WC #629, '49 G, '49 B, '49 WD, '62 D-19, '38 All Crop 60 and still hunting!
|
Replies:
Posted By: NCAllisnut
Date Posted: 16 Aug 2010 at 8:39pm
|
I spent quite a while with a torch, a press, and a big hammer trying to move the arms off of a WD rock shaft, and never got them to budge.
Adam
|
Posted By: David(Stockbridge)MI
Date Posted: 17 Aug 2010 at 6:54am
have a set I bought at albert city along with a pile of other d19 parts, if interested send me a pm.
-------------
All "NEW" Web Site http://www.djstractorparts.com
2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler
|
Posted By: skipwelte
Date Posted: 17 Aug 2010 at 2:22pm
|
Seems like D19s dont get as tight as WDs. They are loose on both my D19s, but not worn real badly in the splines. Yes, the splined shaft slides out of the housing when one of the arms is removed. HTH
|
|