Print Page | Close Window

G Gleaner

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166609
Printed Date: 29 Mar 2024 at 3:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: G Gleaner
Posted By: Steve Bright
Subject: G Gleaner
Date Posted: 13 Dec 2019 at 12:47pm
Restoring a G Gleaner combine, Looking for any available parts, Would like to find a chopper, if possible.



Replies:
Posted By: Lonn
Date Posted: 13 Dec 2019 at 6:44pm
3 or 4 years ago
...... Maybe 6...there was a real pretty G with 301 gas engine that sold for something like $700 here in MN. Wouldn't have been much restoring to do to it either. Some local guy bought it and I'm sure it's still parked in whatever spot he drove it to from the sale.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: zulawski87
Date Posted: 14 Dec 2019 at 8:18am
I have a parts g combine. Located in central mn. Has chopper.


Posted By: Chad (MN)
Date Posted: 15 Dec 2019 at 10:33am
I also have a g gleaner for parts in south central Minnesota. Has a chopper, complete except for the motor.

-------------
220 3-190XT 2-D19d D19g 5-D17 UC 3-WC 2-WD 3-WD45 CA C H3 7-AllCrops 14-plows 3-Gleaners Lawnmowers SC-equipment


Posted By: only AC orange
Date Posted: 15 Dec 2019 at 12:06pm
I see you're located in Martinsville, I - is this Indiana or Illinois? Bryant Combine Salvage in Bryant In. would be a good place to contact, they have several older Gleaners on their lot.


Posted By: Darrell G (MN)
Date Posted: 15 Dec 2019 at 2:26pm
I have a G combine complete except motor a lot of really good sprockets and chains


Posted By: Steve Bright
Date Posted: 16 Dec 2019 at 7:55am
Thanks for all of the replies, I have 1 located at this time about 90 miles from me, Can't meet up until the first week in January, I will keep up with the replies in case this doesn't work out, Glad to know there is so many people with parts. Thanks Steve


Posted By: old farmer
Date Posted: 16 Dec 2019 at 8:26am
If I remember correctly there is a serial number break on G’s. A lot of parts were changed.


Posted By: Dale
Date Posted: 16 Dec 2019 at 5:15pm
Have 2 parts machines and 1 runner. 1 parts G has the diesel and 1 has no motor. I'm likely too far for parts shipping for most . Taking parts off these old G's is not a winter time thing either (both are outside).

Allis engineers made some changes (actually more than I thought) over their model life so some of the parts are different depending on year.

My G runner is a late model diesel, hydro tranny which I think is quite rare, factory air with tilt cab. I've always shedded it. Likely should find it a new home.


Posted By: FREEDGUY
Date Posted: 16 Dec 2019 at 5:54pm
Originally posted by Steve Bright Steve Bright wrote:

Thanks for all of the replies, I have 1 located at this time about 90 miles from me, Can't meet up until the first week in January, I will keep up with the replies in case this doesn't work out, Glad to know there is so many people with parts. Thanks Steve
 
Just exactly what STATE are you from ??!! This might help with responses Wink


Posted By: BillinAlberta
Date Posted: 19 Dec 2019 at 9:50am
Steve !
   I am in the midst of doing the same thing.My G is a 1972 with chev 350 and standard drive.
    I also have a 69 with the 301 gas passer that I had to turn into a part machine.Lots of the parts are different for sure.
    Agco has a few parts left for these machines but check prices carefully.An example is the feeder beater guides(plastic) 2 years ago were around 100(canadian) bucks for 25 and now they were asking 340 for the same package !!!The feeder beater shafts were only 90 bucks for both of them which was cheaper than getting new shafts cut at the local machine shop.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net