Farm Equipment - 190xt vs. chisel plow

Print Page | Close Window

190xt vs. chisel plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=16585
Printed Date: 05 Feb 2025 at 10:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt vs. chisel plow

Posted By: 190puller
Subject: 190xt vs. chisel plow
Date Posted: 14 Aug 2010 at 8:12pm

What size chisel plow is everyone pulling with a 190xt. I'm lookin for one to pull with a series 3 tractor. Any advise is appreciated.

Replies:

Posted By: TREVMAN
Date Posted: 14 Aug 2010 at 8:29pm

My Dad had a 19 foot Grahem Haeme when he had his 190xt. I think it was plenty for the tractor...hope this helps, TREV.

Posted By: Mike NEIN
Date Posted: 14 Aug 2010 at 8:39pm

We use to pull a 10 shank pull type chisel 10' and 19' brady field cultivator with our series III. Handles the chisel good but the fiel cult. was plenty for it. Hope this helps good luck.

Posted By: Lonn
Date Posted: 14 Aug 2010 at 8:45pm

I pull a 9 shank old Krause. So old it is badged Minneapolis Moline but the castings are Krause. Worked well in 5th gear and run deep with 3" twisted shovels.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: Eldon (WA)
Date Posted: 14 Aug 2010 at 11:26pm

I pull a 9 shank 1600 series about 12" deep with my Series III.

-------------
ALLIS EXPRESS!
This year:

Posted By: Dave in il
Date Posted: 19 Aug 2010 at 7:55pm

We used to pull a 9 shank mounted chisle with twisted points and an 18.5' mounted field cultivator and later a 21' pull type with our series III.