720 value
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=165760
Printed Date: 25 Apr 2024 at 11:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720 value
Posted By: Dave Wisc.
Subject: 720 value
Date Posted: 11 Nov 2019 at 3:53pm
|
There is a 720 on a estate sale nonrunning.What is it worth good tin gas tank out of it and lug wires off.Looks good sitting inside a garage.
|
Replies:
Posted By: DSeries4
Date Posted: 11 Nov 2019 at 8:52pm
No more than $500 if you really want it. Non running engine is a big red flag - parts for the original Onan engines are outrageously expensive.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: Dusty MI
Date Posted: 13 Nov 2019 at 9:41am
|
There are after market engines that will fit in them. I've got one that I bought with an after market all ready installed.
Dusty
-------------
917 H, '48 G, '65 D-10 series III "Allis Express"
|
Posted By: Steve in NJ
Date Posted: 17 Nov 2019 at 9:10pm
|
Depends really on what condition it is. If its that nice and still needs an engine, I would think $500. ain't bad, even it you have to repower it. The repower is probably a better engine anyway. As Myron said, the Onan engines are really tough on your wallet when it comes to rebuilding them. It's less money for a brand new repower kit..... Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: Dave Wisc.
Date Posted: 18 Nov 2019 at 7:27am
|
Well tractor mower deck and also front blade sold together it brought 1250.
|
Posted By: Steve in NJ
Date Posted: 18 Nov 2019 at 1:01pm
|
Are you the new owner? If so, ya did good with the deck and a blade I'm thinkin'..! Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: ac720nut
Date Posted: 19 Nov 2019 at 4:46am
|
Good buy considering the prices these have been bringing lately
|
Posted By: Gary Burnett
Date Posted: 23 Nov 2019 at 3:05pm
If it had the PTO clutch and shaft that's $500 right there.
|
|