190 straight shaft couple question
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=165724
Printed Date: 27 Nov 2024 at 6:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 straight shaft couple question
Posted By: brad durst
Subject: 190 straight shaft couple question
Date Posted: 10 Nov 2019 at 7:16pm
| i have heard that i can couple and delete the power director with a coupler out of a 7000 if so what coupler is it. i have also been told that i can made a manual shift coupler out of parts out of a d17 if so what parts do i need |
Replies:
Posted By: ACman75
Date Posted: 11 Nov 2019 at 1:28pm
| For the direct coupler you can use a coupler from180,185,200 dual speed PTO |
Posted By: brad durst
Date Posted: 11 Nov 2019 at 4:38pm
| is that in the back where you flip the shaft for 1000 to 540 or is it locates somewhere else on the tractor. |
Posted By: bsallis180
Date Posted: 11 Nov 2019 at 5:58pm
| It’s located in the TQ housings if I remember. below the PD. Part number 70230321 |
Posted By: brad durst
Date Posted: 11 Nov 2019 at 7:59pm
| thanks |
Posted By: brad durst
Date Posted: 12 Nov 2019 at 7:45pm
| will that give me the hi side or low side |
Posted By: ACman75
Date Posted: 13 Nov 2019 at 9:22pm
| 4 high side gears. It connects the input shaft of trans and clutch shaft of motor together. Direct drive. You remove power director all together |
Posted By: ACman75
Date Posted: 13 Nov 2019 at 9:32pm
|