Print Page | Close Window

WC brake bushing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=165125
Printed Date: 14 Oct 2025 at 1:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WC brake bushing
Posted By: bigfish_Oh
Subject: WC brake bushing
Date Posted: 17 Oct 2019 at 6:03pm
Can someone tell me the ID of the WC brake bushings ? I think it was .781 ID x 1.000 od. I'm going to make some and don'y want to take it back apart yet.
****important tip, don't set WC up on blocks, sell rear wheels and let it fall over. When you come back to it 4 years later, your brake will be full of oil and sludge. drilled a drain hole, 4 gallons of dirty gas rinsed many times, bunch of rags, 3 cans brake cleaner, good used brake, I got a good brake now !


-------------
1941 WC sat for 29 years,started & dynoed 27 h.p.
1957 WD45 Grandpa bought new,factory p.s.,added wfe
1951 WD, factory p.s.
1960 D14 HnMk IV BkHoe 4 sale
2014 HD Tri Glide
2009 GMC CC SLT Dually



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net