Farm Equipment - Three point hitch on a WD 45 snap copler

Print Page | Close Window

Three point hitch on a WD 45 snap copler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164741
Printed Date: 31 Oct 2025 at 6:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Three point hitch on a WD 45 snap copler

Posted By: 1947WC
Subject: Three point hitch on a WD 45 snap copler
Date Posted: 01 Oct 2019 at 10:26pm

How do I install a three point hitch on a WD 45 snapcopler

Replies:

Posted By: jaybmiller
Date Posted: 02 Oct 2019 at 5:22am

Allis made at least 3 point adapters. They both 'snap-in' like regular snap coupler implements then you attach your 3point implement to them.

One version allows for PTO to be used, the other doesn't.

I've bolted my 3 point implments( 5' rototiller and landscape rake) and top links to the adapters. Makes for easy on/off operation.

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: JimD
Date Posted: 03 Oct 2019 at 10:37am

we have a few options listed at http://www.oktractor.com " rel="nofollow - www.oktractor.com ; Some have built their own. If you have the resources, they are not that complicated, but most folks just buy them ready to use. I'll be happy to explain the differences if you need to call me.

-------------
Owner of http://www.OKtractor.com" rel="nofollow - OKtractor.com PM for an instant response on parts. Open M-F 9-6 Central.

We have new and used parts. 877-378-6543

Posted By: 1947WC
Date Posted: 03 Oct 2019 at 12:51pm

Hey Jay THANKS for the information.

Posted By: 1947WC
Date Posted: 03 Oct 2019 at 12:55pm

Hey Jim, I think I got it figured out. Thanks Any way.

Posted By: TimCNY
Date Posted: 03 Oct 2019 at 3:18pm

I put a 3-point conversion on mine a few years back. I'm fine with it, but if I had it to do all over again I would just buy the actual snap-coupler 3-point and change between that and the drawbar as needed. Hindsight is 20-20, just fwiw.

-------------
I need more than 200 characters for my "signature." I'd love to see that changed to 250!

Posted By: ac fleet
Date Posted: 03 Oct 2019 at 7:03pm

I have 1 snap coupler to 3-pt. unit that I use. When not needed or I need snap coupler for the plow it can be removed simply by dropping the latches and open the hook in the eye. also not hard to switch to regular drawbar.

-------------
http://machinebuildersnetwork.com/