620
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164664
Printed Date: 27 Apr 2024 at 5:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 620
Posted By: Jim NEIN
Subject: 620
Date Posted: 28 Sep 2019 at 12:32pm
|
Does anyone know the length of the mower deck drive belt on a 620
|
Replies:
Posted By: Dusty MI
Date Posted: 29 Sep 2019 at 1:00pm
|
What size mower deck do you have? I have a 720 Allis and a 60 deck that I don't use, if it has the belt on it I can measure it.
Dusty
-------------
917 H, '48 G, '65 D-10 series III "Allis Express"
|
Posted By: A-C_220
Date Posted: 29 Sep 2019 at 5:24pm
|
Sounds like it should be 93". https://www.allischalmers.com/forum/need-belt-sizes-for-616-620-720-mower-deck_topic103645.html" rel="nofollow - https://www.allischalmers.com/forum/need-belt-sizes-for-616-620-720-mower-deck_topic103645.html
|
Posted By: Jim NEIN
Date Posted: 29 Sep 2019 at 6:16pm
Posted By: A-C_220
Date Posted: 30 Sep 2019 at 3:05pm
|
Let us know if the 93" works, I may need one if I ever find an electric clutch for mine.
|
Posted By: AC720Man
Date Posted: 30 Sep 2019 at 8:23pm
I’m not sure who makes the Simplicity belts but they last much longer than the TSC or Gates belts. I had a little better luck with the Kevlar belts at TSC but the Simplicity belts are just better made and last longer. It’s worth the extra money in my opinion especially on these bigger decks and more powerful engines. It’s no fun tearing these decks apart to replace belts, so the least times I have to do so, the less time I spend in down time. Even the mule drive belt can be difficult getting it between the battery and the shield in the frame. Opening wasn’t designed wide enough so be careful and don't damage your new belt squeezing it through the opening.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: Steve in NJ
Date Posted: 02 Oct 2019 at 7:24am
|
I installed one those Kevlar belts on my ZT mower last year. So far, its been wearin' like iron! I was just inspecting it the other day and it looks like the day I installed it! Amazing! Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|