breaking plow hookup
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164409
Printed Date: 22 Feb 2025 at 12:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: breaking plow hookup
Posted By: kycottontail
Subject: breaking plow hookup
Date Posted: 17 Sep 2019 at 8:28pm
I just got a Big Ten it came with breaking plow...Looks like I need something. could someone look at these pictures and see what I need 
|
Replies:
Posted By: LionelinKY
Date Posted: 17 Sep 2019 at 11:44pm
|
The part you're looking for is called a "sleeve hitch". It pins to the drawbar assembly on both sides and then 1 large pin connects the plow to the sleeve hitch. Then you will also need the lifting piece which is basically just a steel pipe that slides into the rear lift tube and a chain connects the pipe to the plow somewhere to provide lift. If you google it there are most likely lots of pics online and surely even some videos on youtube. ------------- "My name is Lionel and I'm an Allisoholic" |
Posted By: LionelinKY
Date Posted: 18 Sep 2019 at 12:22am
|
FYI: Even though there were a couple companies that made the implements and hitches, the most popular one was called "Brinley" thus that term has been commonly used to refer to any hitch of similar design that is used to mount rear implements to L&G tractors so a search of "Brinley" on google or youtube should yield good results for what you want. ------------- "My name is Lionel and I'm an Allisoholic" |
Posted By: albrown915
Date Posted: 18 Sep 2019 at 10:20am
| Your plow does appear to be a Brinly and you would need a Brinly adapter ( as I commonly referred to ) I have an original and occasionally make duplicates . I have pictures of the original with dimensions if you want to build. Private message or provide a text # and I can share them with you. |
Posted By: Dakota Dave
Date Posted: 11 Oct 2019 at 7:04pm
|
Along with the brinle hitch youll need the lift its just a stem that slides into the lift quadrant.with alink goin down to the hitch. Youcanmak the yoke if just has a pivot pin each side of the hitch comes back about 6" with a pipe welded to it that thecenter pin drops into a couple bolts welded on to keep the plow from pivoting to far |