Farm Equipment - HELP!!! 1996 Agco 5670 3 point not working

Print Page | Close Window

HELP!!! 1996 Agco 5670 3 point not working

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163804
Printed Date: 27 Sep 2024 at 6:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HELP!!! 1996 Agco 5670 3 point not working

Posted By: Whacky Farmer
Subject: HELP!!! 1996 Agco 5670 3 point not working
Date Posted: 22 Aug 2019 at 3:11am

I recently purchased an Agco 5670 that has been sitting about 2 years. It runs great and everything is working except for the 3 point hitch. It's stuck in the up position. When I move the position lever it will go up and down about 1/2 inch, but that's it. Any help would be greatly appreciated.

Replies:

Posted By: ranger43
Date Posted: 23 Aug 2019 at 7:52pm

we bought a 5670 new and have had some problems with the hydraulics. Had a spool stick one time and also had o-rings fail in pump 2 times. As for the 3 point If you have the position lever all the way forward along with the depth adjustment as you described and it may be a stuck spool or if it has been sitting that long check condition of the exposed part of the cylinder that drives the 3 point arms for pitting.

Posted By: Whacky Farmer
Date Posted: 24 Aug 2019 at 12:30am

Thanks Ranger43. I will take a look at the spool valve, and the cylinders. Fingers crossed