“B” governor issue
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163678
Printed Date: 27 Apr 2024 at 11:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: “B” governor issue
Posted By: GfdMatt
Subject: “B” governor issue
Date Posted: 16 Aug 2019 at 5:35pm
|
Hey all, Today my tractor died on me mid flight as I tried to increase throttle. I thought it may be a fuel delivery issue but I found that the throttle lever felt a little funny. I followed the linkage and found this with the governor. Does this piece just rest into the governor housing? Or is there something internally going on? Thanks 
|
Replies:
Posted By: AaronSEIA
Date Posted: 16 Aug 2019 at 6:03pm
|
Supposed to be a press fit. I took a big pair of Channel Lock pliers and squeezed it good. That knurled it enough that driving it in, it hasn't fallen out in a while. AaronSEIA
|
Posted By: GfdMatt
Date Posted: 16 Aug 2019 at 6:14pm
|
Thanks Aaron, I did just that and it seemed to seat well without budging. I imagine that'll work. Now to get er started again... Is the small line going into the rod an oiler for the gears in the governor? Thanks, Matt
|
Posted By: Gerald J.
Date Posted: 16 Aug 2019 at 8:04pm
|
The shop manual may help: http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf" rel="nofollow - http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf Gerald J. |
Posted By: GfdMatt
Date Posted: 16 Aug 2019 at 9:58pm
| Thank you Gerald! |
Posted By: GfdMatt
Date Posted: 17 Aug 2019 at 12:21am
|
After getting the governor back together and resetting the throttle linkage, the tractor actually runs much better than it did before. I am Now able to get more RPM due to the positioning. Thanks for the help guys |
Posted By: AaronSEIA
Date Posted: 17 Aug 2019 at 6:07am
|
That oil line helps lube the governor. AaronSEIA
|
Posted By: Dick L
Date Posted: 17 Aug 2019 at 7:25am
| The oil from that line dribbled oil on the gears and gets splashed around from the gears meshing as it falls down on its way into the pan. |
Posted By: Lon(MN)
Date Posted: 17 Aug 2019 at 7:29am
| I have some rebuilt covers for sale if anyone is interested. |