Pulling Forum - recomended CA tire size

Print Page | Close Window

recomended CA tire size

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163670
Printed Date: 27 Nov 2024 at 7:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: recomended CA tire size

Posted By: Ken in Texas
Subject: recomended CA tire size
Date Posted: 16 Aug 2019 at 6:17am

for 1st gear 3.5 mph pulling. Stock engine . pulling weights 3000 3500 4000. I'm getting the most out of my 13-6 24s in both 1st and second gear on most tracks. have to reduce revs in second gear to keep from blowing the horn and going to the Dairy Queen

Replies:

Posted By: Sugarmaker
Date Posted: 16 Aug 2019 at 9:41pm

Ken,

Sounds like your having fun!

Bigger tires, more horsepower!

Regards,

Chris

-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.

Posted By: frnkeore
Date Posted: 17 Aug 2019 at 2:10am

If your not powering out, in 1st, try 14.9x24.

-------------
Frank
1959 D17 Series I #24001+, '59 D14
'55 & '59 Ford 850 & 861
Ferguson TO 35 Deluxe, Oliver 70 and 5 more.

Posted By: PaulB
Date Posted: 17 Aug 2019 at 5:52pm

Even A stock CA won't run out of power in GRAMPA gear with 14.9X24. A 14.9x28 maybe.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY